| CamIT
is a standalone Colour IP Camera
with built in motion detection and real time clock,
that integrates with the BTI Observer Monitoring
System at a cost of just £425.
Unlike many security cameras
the CamIT is completely standalone and does
not require any PC at the remote site. Live
images can be viewed via application software
from any PC on the network.
When triggered by built in movement detector
or external trigger i.e. door contact, recorded
images can be sent to remote PC. (No images
need to be stored at camera site). |
 |
When installed as part of a BTI Observer monitoring
system, trigger alerts are also processed as an
Observer alarm. i.e SMS text message or sent to
Central Management Console etc.
- Built in real time clock for scheduling security
mode and recording daily or weekly.
- Display up to sixteen cameras on Windows based
Application Software
Price:
Colour Camera with built in movement detection
£425.00 + installation
(includes monitoring & recording software)
Specifications:
Power consumption: 5V DC, ~270mA
Cable Connections: RJ45 for Ethernet 10BaseT,
RJ12 connector for 5V DC/90~240V AC adaptor and
trigger in/out
Trigger in: NO or NC (Software Selectable) or
5V level trigger
Motion detection sensitivity: High, Medium, and
Low
Motion Detection Zones: 48
Trigger out: Low to High TTL Level 5V
Internet Protocol for IP connection: UDP
UDP Port Used: any plus the last field of the
IP (firewall, if any, has to allow these ports
to go through)
Transmission Speed: High Resolution (640x480):
maximum 6 frames/second; Medium Resolution (320x240):
maximum 15 frames/second; Low Resolution (160x120):
maximum 25 frames/second
Camera Specification: CMOS
Camera support Specification: 300K pixels, 1/3
S/N Ratio: > 48dB
Gamma Correction: 0.45
Min. Illumination: <2.5 lux @ f2.0
Focal Length 3.6mm
Back Focal Length 5.8mm
Aperture F 2
Angle of View (DIA) 92°
Operation Environment: Temperature: 0°C~55°C
Humidity: 85% relative at 25°C
Weight: 150g
Dimension of Main Body: 10cm x 6.5cm x 5 cm
|
